Overlay Text On Image Active Campaign

Overlay Text On Image Active Campaign

Overlay Text On Image Active CampaignOverlay Text On Image Active Campaign

You can likewise see whether the completion rate has increased or reduced, how long it takes for contacts to reach that goal, and you can search all contacts to see who did and didn’t reach the objective. ActiveCampaign’s Message Variables is my favorite function. It saves me a lots of time and effort, and neither MailChimp nor ConvertKit (upgrade: 9/2020 ConvertKit now has ” bits”) has a similar function.

Let’s say you have the given name of only some of your contacts, which is the case with my list. I normally don’t need a given name to register to my list, but in some cases I get a very first name, such as when someone purchases an item. Wouldn’t it be great to welcome your contacts by name, in the events when you have it? You can do this, however it’s troublesome.

I’m also filtering for generic terms added by other systems, such as a dash, or “Guest.” If they have a first name, I state “Hey,” and after that their first name. If they do not, I just say “Hey there,” (Overlay Text On Image Active Campaign). By developing a Message Variable in ActiveCampaign, I can easily change my greeting according to whether I have the contact’s first name.

Overlay Text On Image Active Campaign

I produced a variable that’s merely %greeting-hey%. If I have the contact’s name, it shows up in the email. If I don’t have the contact’s name, it defaults to “Hey,”. Where Message Variables actually conserve me a great deal of time is by enabling me utilize the same automation over and over again for my webinars, and I can quickly alter out all of the information.

Overlay Text On Image Active CampaignOverlay Text On Image Active Campaign

Here are variables for a webinar I run called “Bust Through Creative Blocks.” You can see I have a lot of different variables here, such as the date and time of the webinar, the cost of the item, deal terms, coupon code, and more. Each time I run a brand-new webinar, I can alter each of these variables to match any schedule modifications or offer changes.

And here it is in an e-mail. This message variable enables me to quickly alter out a countdown timer. I did point out earlier that a person of the cons of ActiveCampaign is their email modifying experience. I switched from MailChimp, and MailChimp occurs to have the best e-mail modifying experience. I really like to send out easy emails.

Overlay Text On Image Active Campaign

I’ve found that really difficult to do with ActiveCampaign. For awhile, I was modifying emails in ActiveCampaign’s hybrid editor, which is quite clunky. For a long time, I utilized ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was set off by a basic template I developed. The user interface for the HTML editor looks like it was pulled from some complimentary open-source job. Overlay Text On Image Active Campaign.

However, including images is a little bit of a chore. You need to pick them from a file internet browser. There’s no drag and drop option. ActiveCampaign’s HTML e-mail editor needs that you make up entirely in HTML. The alternative to this, if you wish to have control over the HTML, is to modify pure HTML, with a preview on the side.

Including images to ActiveCampaign’s abundant text editor is a clunky experience. You need separate text boxes for above and below the image. Recently I have actually started using ActiveCampaign’s abundant full-screen editor. They have some good design templates, however I still wish to send the plainest e-mail possible. They do have some plain-looking emails, but they have some degree of minimal formatting, which you can’t get rid of – Overlay Text On Image Active Campaign.

Overlay Text On Image Active Campaign

However, with some adjustments, I can make my email quite basic. I can make it immediately use up the entire window, and I can tweak the typography to be a little larger, and have a bit more prominent. The most frustrating part of ActiveCampaign’s abundant full-screen editor is including images. Picture you’ve simply typed out a terrific email. Overlay Text On Image Active Campaign.

You can’t merely include an image to a block of text. Instead, you need to create 2 blocks of text: one for before the image, and one for after the image. If you have actually made any format changes, you’ll have to keep an eye on those to remain constant. That’s one thing to handle when you desire to include one image, however when you wish to include a number of, it ends up being a huge task.

They even have a fundamental mage editor where you can crop the image – Overlay Text On Image Active Campaign. MailChimp’s editor is the very best I’ve seen in all of the e-mail marketing platforms I’ve attempted. You have access to the underlying code, so you can produce a genuinely plain e-mail, provided you make a standard template initially.

Overlay Text On Image Active Campaign

MailChimp’s integrated image editor is extremely powerful. You can resize, crop, and include custom-made text to your images. I miss out on MailChimp’s email-editing experience (Overlay Text On Image Active Campaign). It would conserve me a little time to have that exact same experience on ActiveCampaign. However the highly-customizable automations I can develop on ActiveCampaign more than make up for that prospective time cost savings.

ConvertKit’s e-mail editing experience is extremely plain, but easy to navigate. Their templates are limited, which is fine with me, however their email modifying experience is a little easier in that you can produce inline images, and you can develop an absolutely plain e-mail, and even edit the underlying HTML. If you wish to make some fast edits to some emails in an automation, with ActiveCampaign, it’s troublesome.

I’ll click an e-mail, and it takes me to the editor for that email. Note that I can’t even Command + Click to open it in another tab. Whether they indicated to or not, ActiveCampaign has disabled Command + Click from the automation editor. If I wished to switch back and forth between numerous e-mails, I would intuitively be inclined open the exact same automation in different tabs, then open the respective emails from each of those tabs.

Overlay Text On Image Active Campaign

In the Automations area, there’s a “Manage Messages” location. From here, you can see all of the messages in each of your automations. You can edit each one, or you can Command + Click to open each in a brand-new tab to more easily edit your entire series. Overlay Text On Image Active Campaign. Contrast that with ConvertKit’s Sequences.

Again, it would conserve me a great deal of time to have ConvertKit’s automation e-mail modifying experience on ActiveCampaign – Overlay Text On Image Active Campaign. But picking an email marketing platform is like selecting a spouse. ActiveCampaign makes up for it with their Message Variables, more robust automations, and advanced segmentation. Mentioning segmentation, another factor I switched from MailChimp to ActiveCampaign was that MailChimp has actually limited division options.

You can integrate qualities with an AND/OR operator, and you can mix and match those groups of characteristics with another AND/OR operator. With MailChimp, you can only segment by AND/OR, nevertheless MailChimp’s Pro plan allows more advanced segmenting, for an extra $199 a month. In my search for the best email marketing platform, I saw numerous others, a few of which I’ve already discussed.

Overlay Text On Image Active Campaign

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be utilizing ConvertKit. Their automations are a lot easier to construct, though they aren’t as versatile as ActiveCampaign’s, and their divisions alternatives aren’t as advanced either. They likewise don’t have objective tracking, or Message Variables. MailChimp. You already understand that I switched from MailChimp to ActiveCampaign.

Overlay Text On Image Active Campaign

Overlay Text On Image Active Campaign

Overlay Text On Image Active CampaignOverlay Text On Image Active Campaign

To start developing an automation in ActiveCampaign, start with a “trigger.” There are a number of ways you can set off an automation, consisting of: When a tag is included When a contact subscribes to a list When a contact sends a kind E-commerce and on-site alternatives (readily available in the “Pro” strategy) When the contact reaches a specific point in another automation.

From there, you can start developing the actions in your automation. Some actions that are readily available in ActiveCampaign’s automations are: Send an e-mail Notify an employee Wait conditions If/then conditionals Split traffic for testing Skip to other parts of the automation Track objectives (The contact can skip to the goal’s location in the automation.) Start or end another automation, or end the current automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact details Include and get rid of tags Add a note Lead scoring, SMS and site messages, and Facebook Custom-made Audience management are all “Pro” features – Overlay Text On Image Active Campaign.

Contrast with ConvertKit‘s Automations, which are more limited. On ConvertKit, you can activate an automation when: The contact submits a kind The contact purchases A tag is contributed to the contact A custom-made field is updated with a specific worth From there, you can create Conditions, to inspect whether the contact has a particular tag or custom-made field worth.

Overlay Text On Image Active Campaign

You can also develop Occasions, which are a bit like ActiveCampaign’s Objectives, but without the reporting. You can track an Occasion when: A tag is added or removed The contact buys A date takes place A customized field is upgraded with a specific value You do not produce e-mails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign comparison. The main method I develop my list is through an e-mail course. ActiveCampaign makes it easy for me to develop my e-mail course exactly how I want to build it. Numerous online marketers develop really simple e-mail sequences for their “email courses.” A contact signs up, and then that contact right away starts getting lessons.

It was easy to build with ActiveCampaign, however impossible when I was with MailChimp. I don’t do that method. My email course is by hand synced with this countdown timer on my website. You need to register by Friday night, and a new course begins each Monday early morning. When I first tried this method, I was on MailChimp.

Overlay Text On Image Active Campaign

Here’s the automation I utilize to invite brand-new trainees to my Style Pitfalls course. There’s a couple of things going on here: The automation sends out all contacts a “welcome e-mail (Overlay Text On Image Active Campaign).” The automation verifies that it’s not Friday. If it’s not Friday, the automation waits till it is Friday. At 11am, it sends out a “pump up” email to get the students all set for next week’s course, and encourage them to share it with buddies.

The contact will begin getting lessons the following Monday early morning. If it is Friday and after 7pm, the contact missed out on registration for next week’s class. They’ll get the pump up email the following Friday early morning, and lessons the Monday after that. It was difficult for me to automate this with MailChimp.

When I run a webinar, I don’t want to send the very same email to every individual on my list. I wish to send them the proper e-mail for their level of engagement – Overlay Text On Image Active Campaign. Overlay Text On Image Active Campaign. Here’s the automation I utilize to promote an evergreen webinar: First it verifies that they have not already acquired the item I pitch in the webinar.

Overlay Text On Image Active Campaign

Then it sends a series of emails to get them thinking about the webinar, and to encourage them to sign up. If they register, they right away struck the “Goal” toward the end of the webinar, and the automation ends. If they don’t register, they get included to an automation promoting a rebroadcast of the webinar. Overlay Text On Image Active Campaign.

This enables me to personalize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam integration panel: I can add tags based upon whether the contact registered, participated in, missed out on, or based upon how long they remained in the webinar. These tags can then set off automations within ActiveCampaign.

It costs me cash, and it makes it most likely that my e-mails go to spam or Gmail’s promos tab. People who do not open my emails make it harder for other e-mails to get to the individuals who actually want them! The “Pro” plan of ActiveCampaign has actually lead scoring developed in.

Overlay Text On Image Active Campaign

Here’s an automation I received from ActiveCampaign’s library of automations, which I utilize to tell which contacts aren’t engaging with my e-mails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it adds brand-new tags for 7 days, 30 days, 60 days, etc Each time they open an email, a separate automation removes them from this automation, eliminates all of those tags, and starts this automation over once again.

This automation can be overwhelming in the beginning, and this is one of those cases where I want ActiveCampaign had a more out-of-the-box option. However, since you can do anything with ActiveCampaign, often you have to construct things from scratch. ActiveCampaign has an alternative to delete non-active customers, which I do not advise.

Some customers don’t have tracking turned on, so their opens aren’t tape-recorded. Others still desire to be subscribed but have actually been hectic. Here’s my reactivation series: I send out one email asking if they still want to be subscribed, and briefly discussing why I keep my email list tidy. In one week, I send them another e-mail (if they already clicked the confirmation link in the previous e-mail, they’ve currently been gotten rid of from the automation utilizing a separate automation) – Overlay Text On Image Active Campaign.

Overlay Text On Image Active Campaign

Overlay Text On Image Active CampaignOverlay Text On Image Active Campaign

The automation then unsubscribes them. My emails likewise have a link to a type where they can enter their e-mail address to let me understand that they don’t have tracking allowed. This form adds a tag that I utilize to filter those contacts out. Overlay Text On Image Active Campaign. I utilized to include this tag when they clicked a link, but when individuals do not have tracking on, it makes those links not work so dependably! I only send out a simple “do you still want my emails?” verification.