Manychat With Active Campaign

Manychat With Active Campaign

Manychat With Active CampaignManychat With Active Campaign

You can also see whether the conclusion rate has actually increased or decreased, the length of time it considers contacts to reach that goal, and you can browse all contacts to see who did and didn’t reach the goal. ActiveCampaign’s Message Variables is my preferred function. It conserves me a lot of time and effort, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” snippets”) has a comparable function.

Let’s state you have the first name of just a few of your contacts, which is the case with my list. I generally do not need a very first name to register to my list, but often I get a very first name, such as when someone purchases a product. Would not it be nice to greet your contacts by name, in the events when you have it? You can do this, however it’s cumbersome.

I’m also filtering for generic terms added by other systems, such as a dash, or “Guest.” If they have a very first name, I state “Hey,” and after that their given name. If they don’t, I simply say “Hey there,” (Manychat With Active Campaign). By building a Message Variable in ActiveCampaign, I can easily alter my welcoming according to whether or not I have the contact’s given name.

Manychat With Active Campaign

I produced a variable that’s merely %greeting-hey%. If I have the contact’s name, it shows up in the email. If I don’t have the contact’s name, it defaults to “Hey,”. Where Message Variables actually save me a lot of time is by enabling me utilize the exact same automation over and over once again for my webinars, and I can quickly change out all of the information.

Manychat With Active CampaignManychat With Active Campaign

Here are variables for a webinar I run called “Bust Through Creative Blocks.” You can see I have a lot of various variables here, such as the date and time of the webinar, the cost of the item, deal terms, voucher code, and more. Each time I run a brand-new webinar, I can change each of these variables to match any schedule changes or offer changes.

And here it is in an email. This message variable enables me to quickly change out a countdown timer. I did discuss earlier that a person of the cons of ActiveCampaign is their email editing experience. I switched from MailChimp, and MailChimp occurs to have the best email modifying experience. I truly like to send out basic e-mails.

Manychat With Active Campaign

I have actually found that very difficult to do with ActiveCampaign. For some time, I was modifying emails in ActiveCampaign’s hybrid editor, which is quite cumbersome. For a long time, I used ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was activated by a fundamental template I developed. The interface for the HTML editor looks like it was pulled from some complimentary open-source task. Manychat With Active Campaign.

Nevertheless, adding images is a bit of a task. You have to pick them from a file web browser. There’s no drag and drop alternative. ActiveCampaign’s HTML email editor needs that you make up entirely in HTML. The alternative to this, if you desire to have control over the HTML, is to edit pure HTML, with a preview on the side.

Including images to ActiveCampaign’s abundant text editor is a clunky experience. You need separate text boxes for above and listed below the image. Recently I have started utilizing ActiveCampaign’s rich full-screen editor. They have some good templates, but I still wish to send the simplest email possible. They do have some plain-looking emails, but they have some degree of very little formatting, which you can’t eliminate – Manychat With Active Campaign.

Manychat With Active Campaign

But, with some changes, I can make my email quite basic. I can make it instantly take up the entire window, and I can fine-tune the typography to be somewhat larger, and have a little bit more leading. The most frustrating part of ActiveCampaign’s rich full-screen editor is adding images. Imagine you have actually simply typed out a terrific email. Manychat With Active Campaign.

You can’t merely include an image to a block of text. Instead, you need to produce 2 blocks of text: one for prior to the image, and one for after the image. If you’ve made any format changes, you’ll have to watch on those to remain constant. That’s something to handle when you want to include one image, but when you wish to include several, it ends up being a big chore.

They even have a fundamental mage editor where you can crop the image – Manychat With Active Campaign. MailChimp’s editor is the finest I have actually seen in all of the e-mail marketing platforms I’ve attempted. You have access to the underlying code, so you can develop a genuinely plain e-mail, offered you make a fundamental design template initially.

Manychat With Active Campaign

MailChimp’s built-in image editor is very powerful. You can resize, crop, and include customized text to your images. I miss MailChimp’s email-editing experience (Manychat With Active Campaign). It would conserve me a little time to have that very same experience on ActiveCampaign. But the highly-customizable automations I can develop on ActiveCampaign more than make up for that possible time cost savings.

ConvertKit’s e-mail modifying experience is extremely plain, however easy to navigate. Their design templates are restricted, which is great with me, however their e-mail modifying experience is somewhat much easier in that you can develop inline images, and you can develop an absolutely plain e-mail, and even modify the underlying HTML. If you wish to make some fast edits to some e-mails in an automation, with ActiveCampaign, it’s troublesome.

I’ll click on an email, and it takes me to the editor for that e-mail. Note that I can’t even Command + Click to open it in another tab. Whether they meant to or not, ActiveCampaign has disabled Command + Click from the automation editor. If I desired to change back and forth between different e-mails, I would intuitively be inclined open the very same automation in different tabs, then open the particular e-mails from each of those tabs.

Manychat With Active Campaign

In the Automations section, there’s a “Handle Messages” location. From here, you can see all of the messages in each of your automations. You can edit every one, or you can Command + Click to open each in a new tab to more quickly edit your whole series. Manychat With Active Campaign. Contrast that with ConvertKit’s Series.

Once again, it would save me a lot of time to have ConvertKit’s automation email editing experience on ActiveCampaign – Manychat With Active Campaign. However choosing an e-mail marketing platform is like selecting a partner. ActiveCampaign makes up for it with their Message Variables, more robust automations, and advanced division. Speaking of segmentation, another factor I changed from MailChimp to ActiveCampaign was that MailChimp has limited division choices.

You can combine qualities with an AND/OR operator, and you can mix and match those groups of traits with another AND/OR operator. With MailChimp, you can only sector by AND/OR, nevertheless MailChimp’s Pro strategy allows more advanced segmenting, for an extra $199 a month. In my look for the perfect e-mail marketing platform, I saw numerous others, some of which I have actually currently discussed.

Manychat With Active Campaign

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be utilizing ConvertKit. Their automations are a lot easier to construct, though they aren’t as flexible as ActiveCampaign’s, and their segmentations alternatives aren’t as sophisticated either. They likewise don’t have objective tracking, or Message Variables. MailChimp. You already know that I switched from MailChimp to ActiveCampaign.

Manychat With Active Campaign

Manychat With Active Campaign

Manychat With Active CampaignManychat With Active Campaign

To begin building an automation in ActiveCampaign, begin with a “trigger.” There are a number of ways you can activate an automation, including: When a tag is added When a contact registers for a list When a contact sends a form E-commerce and on-site alternatives (readily available in the “Pro” plan) When the contact reaches a certain point in another automation.

From there, you can start building the actions in your automation. Some actions that are offered in ActiveCampaign’s automations are: Send an e-mail Alert a group member Wait conditions If/then conditionals Split traffic for screening Skip to other parts of the automation Track goals (The contact can skip to the goal’s location in the automation.) Start or end another automation, or end the present automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact information Add and remove tags Add a note Lead scoring, SMS and site messages, and Facebook Custom-made Audience management are all “Pro” functions – Manychat With Active Campaign.

Contrast with ConvertKit‘s Automations, which are more limited. On ConvertKit, you can trigger an automation when: The contact submits a type The contact buys A tag is included to the contact A custom-made field is upgraded with a specific value From there, you can develop Conditions, to check whether the contact has a specific tag or custom field worth.

Manychat With Active Campaign

You can also create Occasions, which are a bit like ActiveCampaign’s Objectives, but without the reporting. You can track an Occasion when: A tag is included or eliminated The contact makes a purchase A date takes place A custom-made field is upgraded with a certain value You do not create emails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign comparison. The main way I construct my list is through an email course. ActiveCampaign makes it easy for me to develop my email course exactly how I ‘d like to develop it. Lots of marketers develop very simple email series for their “email courses.” A contact register, and after that that contact right away starts getting lessons.

It was easy to develop with ActiveCampaign, however impossible when I was with MailChimp. I do not do that technique. My email course is by hand synced with this countdown timer on my website. You have to register by Friday night, and a new course starts each Monday early morning. When I initially tried this methodology, I was on MailChimp.

Manychat With Active Campaign

Here’s the automation I use to welcome new trainees to my Style Pitfalls course. There’s a couple of things going on here: The automation sends out all contacts a “welcome email (Manychat With Active Campaign).” The automation confirms that it’s not Friday. If it’s not Friday, the automation waits until it is Friday. At 11am, it sends out a “pump up” e-mail to get the students prepared for next week’s course, and encourage them to share it with buddies.

The contact will begin getting lessons the following Monday morning. If it is Friday and after 7pm, the contact missed enrollment for next week’s class. They’ll get the pump up e-mail the following Friday morning, and lessons the Monday after that. It was impossible for me to automate this with MailChimp.

When I run a webinar, I do not wish to send out the exact same e-mail to everyone on my list. I want to send them the appropriate e-mail for their level of engagement – Manychat With Active Campaign. Manychat With Active Campaign. Here’s the automation I use to promote an evergreen webinar: First it verifies that they haven’t already bought the product I pitch in the webinar.

Manychat With Active Campaign

Then it sends a series of emails to get them thinking about the webinar, and to motivate them to register. If they register, they right away hit the “Goal” towards completion of the webinar, and the automation ends. If they don’t register, they get added to an automation promoting a rebroadcast of the webinar. Manychat With Active Campaign.

This enables me to tailor my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam integration panel: I can add tags based upon whether the contact registered, participated in, missed out on, or based upon the length of time they stayed in the webinar. These tags can then trigger automations within ActiveCampaign.

It costs me cash, and it makes it more likely that my e-mails go to spam or Gmail’s promos tab. Individuals who do not open my e-mails make it harder for other e-mails to get to the individuals who really want them! The “Pro” plan of ActiveCampaign has lead scoring integrated in.

Manychat With Active Campaign

Here’s an automation I got from ActiveCampaign’s library of automations, which I utilize to inform which contacts aren’t engaging with my emails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it adds new tags for 7 days, 30 days, 60 days, etc Each time they open an e-mail, a different automation removes them from this automation, gets rid of all of those tags, and starts this automation over again.

This automation can be frustrating initially, and this is among those cases where I wish ActiveCampaign had a more out-of-the-box option. However, because you can do anything with ActiveCampaign, sometimes you have to construct things from scratch. ActiveCampaign has an option to delete inactive subscribers, which I do not suggest.

Some subscribers do not have actually tracking turned on, so their opens aren’t recorded. Others still want to be subscribed however have been busy. Here’s my reactivation sequence: I send one e-mail asking if they still desire to be subscribed, and briefly discussing why I keep my email list clean. In one week, I send them another email (if they currently clicked the verification link in the previous email, they’ve already been eliminated from the automation utilizing a different automation) – Manychat With Active Campaign.

Manychat With Active Campaign

Manychat With Active CampaignManychat With Active Campaign

The automation then unsubscribes them. My e-mails likewise have a link to a type where they can enter their email address to let me understand that they do not have tracking allowed. This form includes a tag that I use to filter those contacts out. Manychat With Active Campaign. I utilized to include this tag when they clicked a link, however when people don’t have tracking on, it makes those links not work so reliably! I only send an easy “do you still desire my emails?” verification.