Link Facebook Lead Page To Active Campaign

Link Facebook Lead Page To Active Campaign

Link Facebook Lead Page To Active CampaignLink Facebook Lead Page To Active Campaign

You can also see whether the conclusion rate has actually increased or reduced, the length of time it considers contacts to reach that goal, and you can browse all contacts to see who did and didn’t reach the goal. ActiveCampaign’s Message Variables is my preferred function. It conserves me a lot of time and effort, and neither MailChimp nor ConvertKit (upgrade: 9/2020 ConvertKit now has ” snippets”) has a comparable feature.

Let’s say you have the first name of only a few of your contacts, which is the case with my list. I typically don’t require a first name to register to my list, but sometimes I get a first name, such as when someone buys a product. Would not it be nice to welcome your contacts by name, in the cases when you have it? You can do this, but it’s troublesome.

I’m also filtering for generic terms included by other systems, such as a dash, or “Visitor.” If they have a first name, I say “Hey,” and after that their given name. If they do not, I just say “Hey there,” (Link Facebook Lead Page To Active Campaign). By constructing a Message Variable in ActiveCampaign, I can quickly alter my greeting according to whether or not I have the contact’s first name.

Link Facebook Lead Page To Active Campaign

I produced a variable that’s simply %greeting-hey%. If I have the contact’s name, it appears in the email. If I do not have the contact’s name, it defaults to “Hey,”. Where Message Variables really conserve me a lot of time is by allowing me utilize the exact same automation over and over once again for my webinars, and I can quickly change out all of the details.

Link Facebook Lead Page To Active CampaignLink Facebook Lead Page To Active Campaign

Here vary for a webinar I run called “Bust Through Creative Blocks.” You can see I have a lot of different variables here, such as the date and time of the webinar, the cost of the item, deal terms, coupon code, and more. Each time I run a brand-new webinar, I can alter each of these variables to match any schedule modifications or deal changes.

And here it is in an email. This message variable enables me to quickly alter out a countdown timer. I did mention earlier that a person of the cons of ActiveCampaign is their email editing experience. I changed from MailChimp, and MailChimp occurs to have the very best email editing experience. I really like to send out simple e-mails.

Link Facebook Lead Page To Active Campaign

I have actually found that extremely hard to do with ActiveCampaign. For some time, I was modifying e-mails in ActiveCampaign’s hybrid editor, which is rather cumbersome. For a long time, I utilized ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was activated by a standard design template I developed. The user interface for the HTML editor appears like it was pulled from some complimentary open-source job. Link Facebook Lead Page To Active Campaign.

Nevertheless, adding images is a little a chore. You need to pick them from a file web browser. There’s no drag and drop alternative. ActiveCampaign’s HTML e-mail editor needs that you make up entirely in HTML. The alternative to this, if you desire to have control over the HTML, is to edit pure HTML, with a preview on the side.

Including images to ActiveCampaign’s rich text editor is a clunky experience. You require different text boxes for above and below the image. Lately I have actually started utilizing ActiveCampaign’s abundant text editor. They have some good templates, however I still wish to send the simplest e-mail possible. They do have some plain-looking e-mails, however they have some degree of minimal format, which you can’t remove – Link Facebook Lead Page To Active Campaign.

Link Facebook Lead Page To Active Campaign

However, with some adjustments, I can make my email quite fundamental. I can make it instantly take up the entire window, and I can modify the typography to be a little bigger, and have a little bit more prominent. The most aggravating part of ActiveCampaign’s rich text editor is adding images. Envision you have actually simply typed out an excellent email. Link Facebook Lead Page To Active Campaign.

You can’t just include an image to a block of text. Rather, you need to produce 2 blocks of text: one for prior to the image, and one for after the image. If you have actually made any format changes, you’ll need to watch on those to stay consistent. That’s something to handle when you wish to include one image, however when you want to include a number of, it becomes a huge task.

They even have a basic mage editor where you can crop the image – Link Facebook Lead Page To Active Campaign. MailChimp’s editor is the very best I have actually seen in all of the e-mail marketing platforms I’ve attempted. You have access to the underlying code, so you can develop a really plain e-mail, provided you make a basic design template initially.

Link Facebook Lead Page To Active Campaign

MailChimp’s integrated image editor is very powerful. You can resize, crop, and include custom-made text to your images. I miss MailChimp’s email-editing experience (Link Facebook Lead Page To Active Campaign). It would save me a little time to have that same experience on ActiveCampaign. However the highly-customizable automations I can build on ActiveCampaign more than offset that possible time savings.

ConvertKit’s email editing experience is really plain, however simple to navigate. Their design templates are restricted, which is fine with me, however their e-mail modifying experience is somewhat simpler because you can develop inline images, and you can create a completely plain email, and even modify the underlying HTML. If you wish to make some fast edits to some emails in an automation, with ActiveCampaign, it’s troublesome.

I’ll click on an email, and it takes me to the editor for that email. Note that I can’t even Command + Click to open it in another tab. Whether they indicated to or not, ActiveCampaign has disabled Command + Click from the automation editor. If I wished to change backward and forward between various e-mails, I would intuitively be inclined open the same automation in various tabs, then open the particular e-mails from each of those tabs.

Link Facebook Lead Page To Active Campaign

In the Automations area, there’s a “Manage Messages” location. From here, you can see all of the messages in each of your automations. You can modify every one, or you can Command + Click to open each in a new tab to more easily modify your entire sequence. Link Facebook Lead Page To Active Campaign. Contrast that with ConvertKit’s Series.

Again, it would save me a lot of time to have ConvertKit’s automation e-mail editing experience on ActiveCampaign – Link Facebook Lead Page To Active Campaign. However selecting an email marketing platform is like selecting a spouse. ActiveCampaign offsets it with their Message Variables, more robust automations, and advanced segmentation. Speaking of division, another factor I switched from MailChimp to ActiveCampaign was that MailChimp has actually limited division choices.

You can integrate attributes with an AND/OR operator, and you can mix and match those groups of characteristics with another AND/OR operator. With MailChimp, you can only sector by AND/OR, however MailChimp’s Pro strategy enables more sophisticated segmenting, for an extra $199 a month. In my look for the perfect e-mail marketing platform, I saw lots of others, some of which I’ve currently discussed.

Link Facebook Lead Page To Active Campaign

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be utilizing ConvertKit. Their automations are much easier to develop, though they aren’t as versatile as ActiveCampaign’s, and their segmentations options aren’t as sophisticated either. They also don’t have goal tracking, or Message Variables. MailChimp. You currently understand that I switched from MailChimp to ActiveCampaign.

Link Facebook Lead Page To Active Campaign

Link Facebook Lead Page To Active Campaign

Link Facebook Lead Page To Active CampaignLink Facebook Lead Page To Active Campaign

To begin developing an automation in ActiveCampaign, start with a “trigger.” There are a variety of ways you can trigger an automation, including: When a tag is added When a contact subscribes to a list When a contact submits a kind E-commerce and on-site alternatives (available in the “Pro” plan) When the contact reaches a specific point in another automation.

From there, you can start developing the actions in your automation. Some actions that are available in ActiveCampaign’s automations are: Send an e-mail Alert an employee Wait conditions If/then conditionals Split traffic for testing Skip to other parts of the automation Track goals (The contact can avoid to the objective’s location in the automation.) Start or end another automation, or end the existing automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact information Include and eliminate tags Include a note Lead scoring, SMS and site messages, and Facebook Custom-made Audience management are all “Pro” features – Link Facebook Lead Page To Active Campaign.

Contrast with ConvertKit‘s Automations, which are more restricted. On ConvertKit, you can set off an automation when: The contact sends a type The contact makes a purchase A tag is contributed to the contact A customized field is upgraded with a certain worth From there, you can develop Conditions, to examine whether the contact has a specific tag or custom-made field worth.

Link Facebook Lead Page To Active Campaign

You can also develop Occasions, which are a bit like ActiveCampaign’s Objectives, however without the reporting. You can track an Event when: A tag is added or gotten rid of The contact buys A date occurs A custom-made field is updated with a certain value You don’t produce e-mails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign contrast. The main method I construct my list is through an email course. ActiveCampaign makes it easy for me to build my email course precisely how I want to develop it. Many marketers develop really easy email series for their “email courses.” A contact signs up, and then that contact immediately starts getting lessons.

It was easy to develop with ActiveCampaign, but impossible when I was with MailChimp. I do not do that approach. My email course is manually synced with this countdown timer on my website. You have to sign up by Friday night, and a new course begins each Monday morning. When I initially tried this method, I was on MailChimp.

Link Facebook Lead Page To Active Campaign

Here’s the automation I utilize to welcome brand-new students to my Style Pitfalls course. There’s a few things going on here: The automation sends out all contacts a “welcome email (Link Facebook Lead Page To Active Campaign).” The automation confirms that it’s not Friday. If it’s not Friday, the automation waits up until it is Friday. At 11am, it sends a “pump up” email to get the students ready for next week’s course, and encourage them to share it with buddies.

The contact will start getting lessons the following Monday early morning. If it is Friday and after 7pm, the contact missed out on enrollment for next week’s class. They’ll get the pump up e-mail the following Friday early morning, and lessons the Monday after that. It was difficult for me to automate this with MailChimp.

When I run a webinar, I do not wish to send the very same e-mail to every individual on my list. I wish to send them the suitable e-mail for their level of engagement – Link Facebook Lead Page To Active Campaign. Link Facebook Lead Page To Active Campaign. Here’s the automation I utilize to promote an evergreen webinar: First it validates that they haven’t already purchased the item I pitch in the webinar.

Link Facebook Lead Page To Active Campaign

Then it sends out a series of emails to get them thinking about the webinar, and to motivate them to sign up. If they register, they instantly hit the “Goal” towards the end of the webinar, and the automation ends. If they don’t register, they get contributed to an automation promoting a rebroadcast of the webinar. Link Facebook Lead Page To Active Campaign.

This enables me to personalize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam combination panel: I can add tags based upon whether the contact signed up, attended, missed out on, or based upon how long they remained in the webinar. These tags can then set off automations within ActiveCampaign.

It costs me cash, and it makes it more most likely that my e-mails go to spam or Gmail’s promotions tab. People who do not open my e-mails make it harder for other e-mails to get to the individuals who truly desire them! The “Pro” plan of ActiveCampaign has lead scoring integrated in.

Link Facebook Lead Page To Active Campaign

Here’s an automation I received from ActiveCampaign’s library of automations, which I use to inform which contacts aren’t engaging with my emails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it includes brand-new tags for 7 days, 1 month, 60 days, etc Each time they open an e-mail, a separate automation eliminates them from this automation, gets rid of all of those tags, and starts this automation over once again.

This automation can be overwhelming initially, and this is one of those cases where I wish ActiveCampaign had a more out-of-the-box solution. But, because you can do anything with ActiveCampaign, often you have to develop things from scratch. ActiveCampaign has an option to erase non-active subscribers, which I don’t recommend.

Some subscribers don’t have actually tracking switched on, so their opens aren’t tape-recorded. Others still desire to be subscribed but have been hectic. Here’s my reactivation sequence: I send out one e-mail asking if they still wish to be subscribed, and briefly describing why I keep my e-mail list clean. In one week, I send them another e-mail (if they already clicked the verification link in the previous e-mail, they have actually already been eliminated from the automation utilizing a separate automation) – Link Facebook Lead Page To Active Campaign.

Link Facebook Lead Page To Active Campaign

Link Facebook Lead Page To Active CampaignLink Facebook Lead Page To Active Campaign

The automation then unsubscribes them. My e-mails likewise have a link to a type where they can enter their email address to let me know that they do not have tracking allowed. This type includes a tag that I use to filter those contacts out. Link Facebook Lead Page To Active Campaign. I used to include this tag when they clicked on a link, but when people don’t have tracking on, it makes those links not work so reliably! I just send a simple “do you still want my emails?” confirmation.