How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active CampaignHow To Add New Users From Wp Directly Into Active Campaign

You can likewise see whether the conclusion rate has increased or decreased, the length of time it takes for contacts to reach that objective, and you can search all contacts to see who did and didn’t reach the objective. ActiveCampaign’s Message Variables is my preferred function. It conserves me a lots of time and effort, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” snippets”) has an equivalent function.

Let’s state you have the given name of only some of your contacts, which is the case with my list. I normally don’t need a given name to register to my list, however often I get a given name, such as when someone buys a product. Wouldn’t it be great to welcome your contacts by name, in the cases when you have it? You can do this, but it’s cumbersome.

I’m likewise filtering for generic terms added by other systems, such as a dash, or “Guest.” If they have a first name, I say “Hey,” and after that their first name. If they do not, I simply say “Hey there,” (How To Add New Users From Wp Directly Into Active Campaign). By building a Message Variable in ActiveCampaign, I can quickly change my welcoming according to whether or not I have the contact’s first name.

How To Add New Users From Wp Directly Into Active Campaign

I produced a variable that’s just %greeting-hey%. If I have the contact’s name, it reveals up in the e-mail. If I don’t have the contact’s name, it defaults to “Hey,”. Where Message Variables actually save me a lot of time is by allowing me use the exact same automation over and over again for my webinars, and I can quickly change out all of the information.

How To Add New Users From Wp Directly Into Active CampaignHow To Add New Users From Wp Directly Into Active Campaign

Here are variables for a webinar I run called “Bust Through Creative Blocks.” You can see I have a bunch of different variables here, such as the date and time of the webinar, the rate of the product, deal terms, coupon code, and more. Each time I run a brand-new webinar, I can alter each of these variables to match any schedule changes or deal changes.

And here it remains in an email. This message variable allows me to easily change out a countdown timer. I did point out earlier that one of the cons of ActiveCampaign is their email editing experience. I changed from MailChimp, and MailChimp occurs to have the finest e-mail modifying experience. I actually like to send out simple e-mails.

How To Add New Users From Wp Directly Into Active Campaign

I have actually found that really hard to do with ActiveCampaign. For awhile, I was editing e-mails in ActiveCampaign’s hybrid editor, which is quite cumbersome. For a long time, I utilized ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was activated by a fundamental design template I produced. The user interface for the HTML editor appears like it was pulled from some complimentary open-source task. How To Add New Users From Wp Directly Into Active Campaign.

Nevertheless, including images is a little a task. You need to pick them from a file browser. There’s no drag and drop choice. ActiveCampaign’s HTML e-mail editor requires that you compose entirely in HTML. The option to this, if you want to have control over the HTML, is to edit pure HTML, with a preview on the side.

Adding images to ActiveCampaign’s abundant text editor is a clunky experience. You need different text boxes for above and listed below the image. Recently I have actually begun utilizing ActiveCampaign’s abundant text editor. They have some nice design templates, however I still wish to send the simplest email possible. They do have some plain-looking emails, but they have some degree of very little format, which you can’t eliminate – How To Add New Users From Wp Directly Into Active Campaign.

How To Add New Users From Wp Directly Into Active Campaign

But, with some adjustments, I can make my email pretty standard. I can make it instantly take up the entire window, and I can tweak the typography to be a little bigger, and have a little more leading. The most discouraging part of ActiveCampaign’s abundant text editor is adding images. Envision you’ve just typed out a fantastic e-mail. How To Add New Users From Wp Directly Into Active Campaign.

You can’t simply add an image to a block of text. Instead, you need to create two blocks of text: one for prior to the image, and one for after the image. If you have actually made any format modifications, you’ll need to keep an eye on those to stay consistent. That’s something to handle when you wish to include one image, but when you want to include a number of, it becomes a huge chore.

They even have a basic mage editor where you can crop the image – How To Add New Users From Wp Directly Into Active Campaign. MailChimp’s editor is the finest I’ve seen in all of the e-mail marketing platforms I have actually attempted. You have access to the underlying code, so you can develop a truly plain email, provided you make a basic template first.

How To Add New Users From Wp Directly Into Active Campaign

MailChimp’s built-in image editor is very effective. You can resize, crop, and include customized text to your images. I miss out on MailChimp’s email-editing experience (How To Add New Users From Wp Directly Into Active Campaign). It would save me a little time to have that very same experience on ActiveCampaign. But the highly-customizable automations I can construct on ActiveCampaign more than offset that possible time cost savings.

ConvertKit’s email editing experience is really plain, however easy to navigate. Their templates are restricted, which is fine with me, however their e-mail modifying experience is slightly simpler because you can create inline images, and you can create an absolutely plain e-mail, and even modify the underlying HTML. If you wish to make some quick edits to some emails in an automation, with ActiveCampaign, it’s cumbersome.

I’ll click an e-mail, and it takes me to the editor for that e-mail. Note that I can’t even Command + Click to open it in another tab. Whether they suggested to or not, ActiveCampaign has disabled Command + Click from the automation editor. If I wished to change backward and forward in between numerous e-mails, I would intuitively be inclined open the very same automation in different tabs, then open the particular e-mails from each of those tabs.

How To Add New Users From Wp Directly Into Active Campaign

In the Automations section, there’s a “Handle Messages” area. From here, you can see all of the messages in each of your automations. You can modify each one, or you can Command + Click to open each in a new tab to more quickly edit your entire sequence. How To Add New Users From Wp Directly Into Active Campaign. Contrast that with ConvertKit’s Sequences.

Once again, it would save me a great deal of time to have ConvertKit’s automation e-mail modifying experience on ActiveCampaign – How To Add New Users From Wp Directly Into Active Campaign. But choosing an email marketing platform resembles choosing a spouse. ActiveCampaign offsets it with their Message Variables, more robust automations, and advanced division. Mentioning segmentation, another factor I switched from MailChimp to ActiveCampaign was that MailChimp has limited division choices.

You can combine qualities with an AND/OR operator, and you can blend and match those groups of qualities with another AND/OR operator. With MailChimp, you can only sector by AND/OR, nevertheless MailChimp’s Pro plan enables more sophisticated segmenting, for an additional $199 a month. In my search for the perfect email marketing platform, I saw numerous others, some of which I’ve already mentioned.

How To Add New Users From Wp Directly Into Active Campaign

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be using ConvertKit. Their automations are a lot easier to develop, though they aren’t as flexible as ActiveCampaign’s, and their segmentations alternatives aren’t as sophisticated either. They also do not have objective tracking, or Message Variables. MailChimp. You currently understand that I changed from MailChimp to ActiveCampaign.

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active CampaignHow To Add New Users From Wp Directly Into Active Campaign

To start constructing an automation in ActiveCampaign, start with a “trigger.” There are a variety of methods you can set off an automation, including: When a tag is included When a contact signs up for a list When a contact submits a kind E-commerce and on-site alternatives (available in the “Pro” strategy) When the contact reaches a certain point in another automation.

From there, you can start constructing the actions in your automation. Some actions that are readily available in ActiveCampaign’s automations are: Send out an email Alert a team member Wait conditions If/then conditionals Split traffic for screening Avoid to other parts of the automation Track objectives (The contact can skip to the goal’s location in the automation.) Start or end another automation, or end the present automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact details Add and eliminate tags Include a note Lead scoring, SMS and website messages, and Facebook Customized Audience management are all “Pro” features – How To Add New Users From Wp Directly Into Active Campaign.

Contrast with ConvertKit‘s Automations, which are more restricted. On ConvertKit, you can trigger an automation when: The contact submits a type The contact purchases A tag is contributed to the contact A custom field is upgraded with a particular value From there, you can develop Conditions, to check whether the contact has a certain tag or customized field worth.

How To Add New Users From Wp Directly Into Active Campaign

You can also create Occasions, which are a bit like ActiveCampaign’s Objectives, but without the reporting. You can track an Occasion when: A tag is added or gotten rid of The contact buys A date takes place A customized field is updated with a certain worth You don’t create emails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign contrast. The main method I develop my list is through an email course. ActiveCampaign makes it simple for me to construct my email course exactly how I want to develop it. Numerous marketers construct very basic email sequences for their “e-mail courses.” A contact register, and after that that contact immediately begins getting lessons.

It was simple to construct with ActiveCampaign, however difficult when I was with MailChimp. I don’t do that approach. My email course is manually synced with this countdown timer on my website. You have to register by Friday night, and a new course starts each Monday morning. When I initially attempted this approach, I was on MailChimp.

How To Add New Users From Wp Directly Into Active Campaign

Here’s the automation I use to welcome brand-new students to my Design Pitfalls course. There’s a couple of things going on here: The automation sends all contacts a “welcome e-mail (How To Add New Users From Wp Directly Into Active Campaign).” The automation validates that it’s not Friday. If it’s not Friday, the automation waits till it is Friday. At 11am, it sends a “pump up” email to get the students ready for next week’s course, and motivate them to share it with buddies.

The contact will begin getting lessons the following Monday morning. If it is Friday and after 7pm, the contact missed out on registration for next week’s class. They’ll get the pump up email the following Friday early morning, and lessons the Monday after that. It was difficult for me to automate this with MailChimp.

When I run a webinar, I do not wish to send out the very same email to every person on my list. I desire to send them the proper e-mail for their level of engagement – How To Add New Users From Wp Directly Into Active Campaign. How To Add New Users From Wp Directly Into Active Campaign. Here’s the automation I use to promote an evergreen webinar: First it validates that they haven’t already bought the item I pitch in the webinar.

How To Add New Users From Wp Directly Into Active Campaign

Then it sends out a series of emails to get them thinking about the webinar, and to motivate them to register. If they register, they right away hit the “Objective” towards completion of the webinar, and the automation ends. If they do not register, they get included to an automation promoting a rebroadcast of the webinar. How To Add New Users From Wp Directly Into Active Campaign.

This enables me to personalize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam integration panel: I can include tags based upon whether the contact registered, attended, missed, or based upon for how long they remained in the webinar. These tags can then activate automations within ActiveCampaign.

It costs me money, and it makes it more likely that my e-mails go to spam or Gmail’s promos tab. People who don’t open my emails make it harder for other emails to get to individuals who actually desire them! The “Pro” plan of ActiveCampaign has lead scoring integrated in.

How To Add New Users From Wp Directly Into Active Campaign

Here’s an automation I received from ActiveCampaign’s library of automations, which I use to inform which contacts aren’t engaging with my e-mails. When a contact subscribes, this automation includes a “0 days” tag. As time passes, it includes brand-new tags for 7 days, 30 days, 60 days, etc Each time they open an email, a different automation eliminates them from this automation, gets rid of all of those tags, and begins this automation over again.

This automation can be overwhelming at first, and this is among those cases where I want ActiveCampaign had a more out-of-the-box service. However, since you can do anything with ActiveCampaign, in some cases you have to build things from scratch. ActiveCampaign has an option to delete inactive customers, which I do not suggest.

Some subscribers do not have tracking switched on, so their opens aren’t recorded. Others still desire to be subscribed however have actually been busy. Here’s my reactivation sequence: I send one email asking if they still desire to be subscribed, and briefly discussing why I keep my e-mail list clean. In one week, I send them another e-mail (if they already clicked on the verification link in the previous e-mail, they’ve already been gotten rid of from the automation utilizing a separate automation) – How To Add New Users From Wp Directly Into Active Campaign.

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active CampaignHow To Add New Users From Wp Directly Into Active Campaign

The automation then unsubscribes them. My e-mails likewise have a link to a type where they can enter their email address to let me understand that they don’t have tracking allowed. This form includes a tag that I utilize to filter those contacts out. How To Add New Users From Wp Directly Into Active Campaign. I utilized to include this tag when they clicked on a link, however when people don’t have tracking on, it makes those links not work so dependably! I just send a simple “do you still want my emails?” verification.

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active CampaignHow To Add New Users From Wp Directly Into Active Campaign

You can also see whether the conclusion rate has increased or reduced, the length of time it takes for contacts to reach that goal, and you can search all contacts to see who did and didn’t reach the goal. ActiveCampaign’s Message Variables is my preferred function. It conserves me a ton of effort and time, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” bits”) has an equivalent feature.

Let’s state you have the first name of just some of your contacts, which is the case with my list. I typically do not require a first name to register to my list, but sometimes I get a very first name, such as when someone purchases a product. Would not it be nice to welcome your contacts by name, in the cases when you have it? You can do this, however it’s troublesome.

I’m likewise filtering for generic terms included by other systems, such as a dash, or “Guest.” If they have a given name, I say “Hey,” and then their given name. If they don’t, I just state “Hey there,” (How To Add New Users From Wp Directly Into Active Campaign). By developing a Message Variable in ActiveCampaign, I can easily alter my welcoming according to whether or not I have the contact’s first name.

How To Add New Users From Wp Directly Into Active Campaign

I developed a variable that’s simply %greeting-hey%. If I have the contact’s name, it reveals up in the e-mail. If I do not have the contact’s name, it defaults to “Hey,”. Where Message Variables actually conserve me a great deal of time is by enabling me utilize the exact same automation over and over once again for my webinars, and I can rapidly alter out all of the details.

How To Add New Users From Wp Directly Into Active CampaignHow To Add New Users From Wp Directly Into Active Campaign

Here are variables for a webinar I run called “Bust Through Creative Blocks.” You can see I have a lot of various variables here, such as the date and time of the webinar, the cost of the item, deal terms, discount coupon code, and more. Each time I run a new webinar, I can alter each of these variables to match any schedule changes or offer modifications.

And here it is in an email. This message variable enables me to easily alter out a countdown timer. I did mention earlier that one of the cons of ActiveCampaign is their email editing experience. I switched from MailChimp, and MailChimp occurs to have the best email modifying experience. I actually like to send out simple emails.

How To Add New Users From Wp Directly Into Active Campaign

I’ve discovered that very difficult to do with ActiveCampaign. For awhile, I was modifying e-mails in ActiveCampaign’s hybrid editor, which is rather cumbersome. For a long period of time, I used ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was set off by a standard design template I developed. The user interface for the HTML editor appears like it was pulled from some totally free open-source job. How To Add New Users From Wp Directly Into Active Campaign.

Nevertheless, adding images is a bit of a task. You have to choose them from a file web browser. There’s no drag and drop alternative. ActiveCampaign’s HTML email editor needs that you compose completely in HTML. The option to this, if you desire to have control over the HTML, is to edit pure HTML, with a sneak peek on the side.

Including images to ActiveCampaign’s abundant full-screen editor is a cumbersome experience. You need different text boxes for above and listed below the image. Lately I have actually begun utilizing ActiveCampaign’s abundant text editor. They have some great design templates, but I still wish to send the plainest email possible. They do have some plain-looking e-mails, however they have some degree of very little formatting, which you can’t remove – How To Add New Users From Wp Directly Into Active Campaign.

How To Add New Users From Wp Directly Into Active Campaign

But, with some modifications, I can make my email pretty basic. I can make it automatically use up the whole window, and I can tweak the typography to be slightly bigger, and have a bit more prominent. The most frustrating part of ActiveCampaign’s rich full-screen editor is adding images. Envision you’ve just typed out a fantastic e-mail. How To Add New Users From Wp Directly Into Active Campaign.

You can’t merely include an image to a block of text. Rather, you need to develop 2 blocks of text: one for before the image, and one for after the image. If you have actually made any formatting modifications, you’ll need to keep an eye on those to remain constant. That’s one thing to deal with when you desire to add one image, however when you desire to include numerous, it ends up being a huge chore.

They even have a fundamental mage editor where you can crop the image – How To Add New Users From Wp Directly Into Active Campaign. MailChimp’s editor is the very best I have actually seen in all of the e-mail marketing platforms I have actually attempted. You have access to the underlying code, so you can create a really plain e-mail, offered you make a basic design template first.

How To Add New Users From Wp Directly Into Active Campaign

MailChimp’s built-in image editor is extremely effective. You can resize, crop, and include custom-made text to your images. I miss out on MailChimp’s email-editing experience (How To Add New Users From Wp Directly Into Active Campaign). It would conserve me a little time to have that exact same experience on ActiveCampaign. But the highly-customizable automations I can develop on ActiveCampaign more than make up for that prospective time savings.

ConvertKit’s email editing experience is really plain, but easy to browse. Their templates are limited, which is fine with me, however their e-mail modifying experience is a little much easier in that you can develop inline images, and you can create a totally plain e-mail, and even modify the underlying HTML. If you want to make some quick edits to some emails in an automation, with ActiveCampaign, it’s troublesome.

I’ll click an e-mail, and it takes me to the editor for that email. Note that I can’t even Command + Click to open it in another tab. Whether they indicated to or not, ActiveCampaign has handicapped Command + Click from the automation editor. If I desired to switch backward and forward in between different e-mails, I would intuitively be inclined open the very same automation in different tabs, then open the particular emails from each of those tabs.

How To Add New Users From Wp Directly Into Active Campaign

In the Automations section, there’s a “Handle Messages” area. From here, you can see all of the messages in each of your automations. You can modify every one, or you can Command + Click to open each in a new tab to more easily edit your entire series. How To Add New Users From Wp Directly Into Active Campaign. Contrast that with ConvertKit’s Sequences.

Once again, it would conserve me a great deal of time to have ConvertKit’s automation e-mail editing experience on ActiveCampaign – How To Add New Users From Wp Directly Into Active Campaign. However choosing an email marketing platform resembles choosing a spouse. ActiveCampaign offsets it with their Message Variables, more robust automations, and advanced division. Mentioning division, another factor I changed from MailChimp to ActiveCampaign was that MailChimp has restricted segmentation choices.

You can integrate attributes with an AND/OR operator, and you can mix and match those groups of traits with another AND/OR operator. With MailChimp, you can just segment by AND/OR, however MailChimp’s Pro strategy enables more sophisticated segmenting, for an additional $199 a month. In my search for the best e-mail marketing platform, I saw numerous others, a few of which I have actually already pointed out.

How To Add New Users From Wp Directly Into Active Campaign

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be using ConvertKit. Their automations are much simpler to construct, though they aren’t as versatile as ActiveCampaign’s, and their segmentations options aren’t as sophisticated either. They likewise don’t have goal tracking, or Message Variables. MailChimp. You currently understand that I switched from MailChimp to ActiveCampaign.

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active CampaignHow To Add New Users From Wp Directly Into Active Campaign

To begin constructing an automation in ActiveCampaign, begin with a “trigger.” There are a variety of methods you can trigger an automation, consisting of: When a tag is included When a contact signs up for a list When a contact sends a form E-commerce and on-site alternatives (readily available in the “Pro” strategy) When the contact reaches a certain point in another automation.

From there, you can start constructing the actions in your automation. Some actions that are offered in ActiveCampaign’s automations are: Send out an e-mail Notify an employee Wait conditions If/then conditionals Split traffic for screening Avoid to other parts of the automation Track objectives (The contact can skip to the objective’s place in the automation.) Start or end another automation, or end the existing automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact details Add and eliminate tags Include a note Lead scoring, SMS and website messages, and Facebook Custom Audience management are all “Pro” functions – How To Add New Users From Wp Directly Into Active Campaign.

Contrast with ConvertKit‘s Automations, which are more minimal. On ConvertKit, you can activate an automation when: The contact sends a type The contact purchases A tag is contributed to the contact A custom-made field is updated with a specific worth From there, you can create Conditions, to check whether the contact has a particular tag or customized field worth.

How To Add New Users From Wp Directly Into Active Campaign

You can also create Occasions, which are a bit like ActiveCampaign’s Goals, but without the reporting. You can track an Event when: A tag is added or eliminated The contact makes a purchase A date takes place A customized field is upgraded with a particular value You do not produce e-mails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign comparison. The primary method I construct my list is through an e-mail course. ActiveCampaign makes it easy for me to construct my email course precisely how I want to develop it. Many online marketers develop really easy e-mail sequences for their “email courses.” A contact register, and after that that contact instantly begins getting lessons.

It was simple to develop with ActiveCampaign, however difficult when I was with MailChimp. I do not do that technique. My email course is manually synced with this countdown timer on my website. You need to register by Friday night, and a brand-new course starts each Monday morning. When I initially attempted this method, I was on MailChimp.

How To Add New Users From Wp Directly Into Active Campaign

Here’s the automation I use to welcome new students to my Design Pitfalls course. There’s a few things going on here: The automation sends all contacts a “welcome e-mail (How To Add New Users From Wp Directly Into Active Campaign).” The automation validates that it’s not Friday. If it’s not Friday, the automation waits till it is Friday. At 11am, it sends out a “pump up” email to get the students all set for next week’s course, and encourage them to share it with pals.

The contact will start getting lessons the following Monday morning. If it is Friday and after 7pm, the contact missed out on enrollment for next week’s class. They’ll get the pump up email the following Friday early morning, and lessons the Monday after that. It was difficult for me to automate this with MailChimp.

When I run a webinar, I do not desire to send the very same email to every individual on my list. I wish to send them the suitable email for their level of engagement – How To Add New Users From Wp Directly Into Active Campaign. How To Add New Users From Wp Directly Into Active Campaign. Here’s the automation I use to promote an evergreen webinar: First it validates that they haven’t already purchased the item I pitch in the webinar.

How To Add New Users From Wp Directly Into Active Campaign

Then it sends a series of e-mails to get them thinking about the webinar, and to encourage them to register. If they sign up, they instantly struck the “Goal” towards the end of the webinar, and the automation ends. If they do not sign up, they get contributed to an automation promoting a rebroadcast of the webinar. How To Add New Users From Wp Directly Into Active Campaign.

This allows me to customize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam integration panel: I can add tags based upon whether the contact registered, attended, missed out on, or based upon the length of time they remained in the webinar. These tags can then trigger automations within ActiveCampaign.

It costs me cash, and it makes it more most likely that my emails go to spam or Gmail’s promotions tab. People who don’t open my e-mails make it harder for other emails to get to the individuals who really desire them! The “Pro” plan of ActiveCampaign has lead scoring constructed in.

How To Add New Users From Wp Directly Into Active Campaign

Here’s an automation I received from ActiveCampaign’s library of automations, which I utilize to tell which contacts aren’t engaging with my e-mails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it adds brand-new tags for 7 days, 1 month, 60 days, etc Each time they open an e-mail, a separate automation removes them from this automation, removes all of those tags, and starts this automation over once again.

This automation can be overwhelming in the beginning, and this is among those cases where I want ActiveCampaign had a more out-of-the-box solution. But, since you can do anything with ActiveCampaign, in some cases you need to construct things from scratch. ActiveCampaign has an option to delete non-active customers, which I don’t advise.

Some customers do not have actually tracking switched on, so their opens aren’t taped. Others still want to be subscribed but have been busy. Here’s my reactivation sequence: I send out one e-mail asking if they still want to be subscribed, and briefly describing why I keep my e-mail list tidy. In one week, I send them another email (if they already clicked on the confirmation link in the previous e-mail, they’ve already been removed from the automation utilizing a separate automation) – How To Add New Users From Wp Directly Into Active Campaign.

How To Add New Users From Wp Directly Into Active Campaign

How To Add New Users From Wp Directly Into Active CampaignHow To Add New Users From Wp Directly Into Active Campaign

The automation then unsubscribes them. My emails likewise have a link to a kind where they can enter their e-mail address to let me understand that they do not have tracking made it possible for. This type adds a tag that I utilize to filter those contacts out. How To Add New Users From Wp Directly Into Active Campaign. I utilized to add this tag when they clicked a link, however when individuals do not have tracking on, it makes those links not work so dependably! I only send out an easy “do you still want my e-mails?” verification.