Fatal Error: Cannot Redeclare Session_reset() Active Campaign

You can also see whether the completion rate has actually increased or decreased, for how long it considers contacts to reach that goal, and you can browse all contacts to see who did and didn’t reach the objective. ActiveCampaign’s Message Variables is my preferred feature. It conserves me a lots of effort and time, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” snippets”) has a comparable function.

Let’s state you have the given name of just a few of your contacts, which is the case with my list. I typically do not need a first name to register to my list, but in some cases I get a first name, such as when someone purchases a product. Wouldn’t it be great to welcome your contacts by name, in the cases when you have it? You can do this, but it’s cumbersome.

I’m also filtering for generic terms added by other systems, such as a dash, or “Guest.” If they have a very first name, I say “Hey,” and after that their first name. If they do not, I simply state “Hey there,” (Fatal Error: Cannot Redeclare Session_reset() Active Campaign). By developing a Message Variable in ActiveCampaign, I can easily change my welcoming according to whether or not I have the contact’s very first name.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

I produced a variable that’s just %greeting-hey%. If I have the contact’s name, it reveals up in the email. If I don’t have the contact’s name, it defaults to “Hey,”. Where Message Variables truly conserve me a lot of time is by allowing me utilize the same automation over and over again for my webinars, and I can quickly change out all of the information.

Here vary for a webinar I run called “Bust Through Creative Blocks.” You can see I have a bunch of different variables here, such as the date and time of the webinar, the rate of the product, offer terms, discount coupon code, and more. Each time I run a new webinar, I can change each of these variables to match any schedule changes or deal modifications.

And here it is in an e-mail. This message variable allows me to easily alter out a countdown timer. I did discuss earlier that one of the cons of ActiveCampaign is their email editing experience. I switched from MailChimp, and MailChimp takes place to have the very best e-mail modifying experience. I really like to send out simple e-mails.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

I have actually found that really difficult to do with ActiveCampaign. For awhile, I was editing e-mails in ActiveCampaign’s hybrid editor, which is rather cumbersome. For a long period of time, I used ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was triggered by a fundamental design template I produced. The interface for the HTML editor looks like it was pulled from some free open-source project. Fatal Error: Cannot Redeclare Session_reset() Active Campaign.

Nevertheless, adding images is a little a task. You have to pick them from a file web browser. There’s no drag and drop choice. ActiveCampaign’s HTML e-mail editor needs that you make up totally in HTML. The alternative to this, if you want to have control over the HTML, is to edit pure HTML, with a preview on the side.

Including images to ActiveCampaign’s rich text editor is a cumbersome experience. You need separate text boxes for above and below the image. Recently I have started utilizing ActiveCampaign’s rich text editor. They have some good design templates, however I still wish to send out the simplest email possible. They do have some plain-looking e-mails, but they have some degree of minimal format, which you can’t remove – Fatal Error: Cannot Redeclare Session_reset() Active Campaign.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

However, with some modifications, I can make my email pretty standard. I can make it instantly take up the entire window, and I can tweak the typography to be slightly larger, and have a little more prominent. The most aggravating part of ActiveCampaign’s rich full-screen editor is including images. Envision you have actually just typed out a terrific e-mail. Fatal Error: Cannot Redeclare Session_reset() Active Campaign.

You can’t simply add an image to a block of text. Rather, you have to create two blocks of text: one for prior to the image, and one for after the image. If you have actually made any format modifications, you’ll need to keep an eye on those to remain constant. That’s one thing to deal with when you wish to add one image, but when you desire to include several, it becomes a huge task.

They even have a basic mage editor where you can crop the image – Fatal Error: Cannot Redeclare Session_reset() Active Campaign. MailChimp’s editor is the best I’ve seen in all of the email marketing platforms I’ve tried. You have access to the underlying code, so you can produce a genuinely plain e-mail, supplied you make a basic design template first.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

MailChimp’s built-in image editor is incredibly powerful. You can resize, crop, and include custom text to your images. I miss MailChimp’s email-editing experience (Fatal Error: Cannot Redeclare Session_reset() Active Campaign). It would conserve me a little time to have that same experience on ActiveCampaign. However the highly-customizable automations I can build on ActiveCampaign more than offset that potential time cost savings.

ConvertKit’s e-mail modifying experience is very plain, however simple to navigate. Their templates are restricted, which is great with me, however their email modifying experience is somewhat simpler in that you can develop inline images, and you can develop a totally plain e-mail, and even modify the underlying HTML. If you wish to make some quick edits to some emails in an automation, with ActiveCampaign, it’s troublesome.

I’ll click on an e-mail, and it takes me to the editor for that email. Keep in mind that I can’t even Command + Click to open it in another tab. Whether they indicated to or not, ActiveCampaign has handicapped Command + Click from the automation editor. If I wished to change back and forth between numerous emails, I would intuitively be inclined open the very same automation in different tabs, then open the respective e-mails from each of those tabs.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

In the Automations area, there’s a “Manage Messages” location. From here, you can see all of the messages in each of your automations. You can modify every one, or you can Command + Click to open each in a new tab to more quickly edit your whole series. Fatal Error: Cannot Redeclare Session_reset() Active Campaign. Contrast that with ConvertKit’s Sequences.

Once again, it would conserve me a great deal of time to have ConvertKit’s automation email modifying experience on ActiveCampaign – Fatal Error: Cannot Redeclare Session_reset() Active Campaign. However choosing an email marketing platform is like choosing a partner. ActiveCampaign offsets it with their Message Variables, more robust automations, and advanced segmentation. Speaking of division, another factor I changed from MailChimp to ActiveCampaign was that MailChimp has limited division choices.

You can integrate characteristics with an AND/OR operator, and you can blend and match those groups of qualities with another AND/OR operator. With MailChimp, you can just segment by AND/OR, however MailChimp’s Pro plan allows more sophisticated segmenting, for an extra $199 a month. In my look for the best email marketing platform, I saw lots of others, a few of which I have actually already pointed out.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

ConvertKit. If I weren’t on ActiveCampaign, I would probably be using ConvertKit. Their automations are a lot easier to build, though they aren’t as flexible as ActiveCampaign’s, and their segmentations alternatives aren’t as sophisticated either. They likewise do not have goal tracking, or Message Variables. MailChimp. You currently understand that I changed from MailChimp to ActiveCampaign.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

To begin developing an automation in ActiveCampaign, start with a “trigger.” There are a variety of methods you can activate an automation, including: When a tag is added When a contact subscribes to a list When a contact submits a form E-commerce and on-site choices (offered in the “Pro” strategy) When the contact reaches a certain point in another automation.

From there, you can start developing the actions in your automation. Some actions that are readily available in ActiveCampaign’s automations are: Send an e-mail Inform an employee Wait conditions If/then conditionals Split traffic for screening Skip to other parts of the automation Track goals (The contact can avoid to the objective’s place in the automation.) Start or end another automation, or end the present automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact information Add and get rid of tags Include a note Lead scoring, SMS and website messages, and Facebook Custom Audience management are all “Pro” functions – Fatal Error: Cannot Redeclare Session_reset() Active Campaign.

Contrast with ConvertKit‘s Automations, which are more minimal. On ConvertKit, you can trigger an automation when: The contact submits a type The contact makes a purchase A tag is added to the contact A custom-made field is upgraded with a particular value From there, you can develop Conditions, to check whether the contact has a specific tag or custom-made field worth.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

You can likewise create Events, which are a bit like ActiveCampaign’s Objectives, however without the reporting. You can track an Occasion when: A tag is included or removed The contact makes a purchase A date occurs A custom-made field is updated with a certain worth You don’t produce emails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign contrast. The primary method I construct my list is through an e-mail course. ActiveCampaign makes it easy for me to construct my e-mail course exactly how I ‘d like to construct it. Numerous marketers build very easy email sequences for their “email courses.” A contact register, and after that that contact right away starts getting lessons.

It was easy to build with ActiveCampaign, however difficult when I was with MailChimp. I do not do that technique. My e-mail course is by hand synced with this countdown timer on my website. You need to sign up by Friday night, and a new course starts each Monday early morning. When I first attempted this method, I was on MailChimp.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

Here’s the automation I utilize to welcome brand-new trainees to my Style Pitfalls course. There’s a couple of things going on here: The automation sends all contacts a “welcome email (Fatal Error: Cannot Redeclare Session_reset() Active Campaign).” The automation verifies that it’s not Friday. If it’s not Friday, the automation waits until it is Friday. At 11am, it sends out a “pump up” email to get the trainees prepared for next week’s course, and encourage them to share it with pals.

The contact will start getting lessons the following Monday morning. If it is Friday and after 7pm, the contact missed out on registration for next week’s class. They’ll get the pump up email the following Friday early morning, and lessons the Monday after that. It was impossible for me to automate this with MailChimp.

When I run a webinar, I don’t wish to send the same email to everyone on my list. I wish to send them the suitable email for their level of engagement – Fatal Error: Cannot Redeclare Session_reset() Active Campaign. Fatal Error: Cannot Redeclare Session_reset() Active Campaign. Here’s the automation I utilize to promote an evergreen webinar: First it verifies that they haven’t already bought the item I pitch in the webinar.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

Then it sends out a series of emails to get them thinking about the webinar, and to motivate them to sign up. If they register, they immediately struck the “Objective” toward completion of the webinar, and the automation ends. If they do not sign up, they get included to an automation promoting a rebroadcast of the webinar. Fatal Error: Cannot Redeclare Session_reset() Active Campaign.

This allows me to customize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam integration panel: I can include tags based upon whether the contact registered, attended, missed, or based upon how long they remained in the webinar. These tags can then trigger automations within ActiveCampaign.

It costs me money, and it makes it more most likely that my e-mails go to spam or Gmail’s promos tab. People who don’t open my emails make it harder for other emails to get to individuals who really desire them! The “Pro” strategy of ActiveCampaign has actually lead scoring built in.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

Here’s an automation I received from ActiveCampaign’s library of automations, which I use to inform which contacts aren’t engaging with my e-mails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it adds new tags for 7 days, one month, 60 days, etc Each time they open an email, a separate automation removes them from this automation, gets rid of all of those tags, and begins this automation over again.

This automation can be overwhelming initially, and this is among those cases where I want ActiveCampaign had a more out-of-the-box option. However, since you can do anything with ActiveCampaign, often you need to develop things from scratch. ActiveCampaign has an option to erase inactive subscribers, which I don’t advise.

Some customers do not have actually tracking switched on, so their opens aren’t tape-recorded. Others still desire to be subscribed but have actually been busy. Here’s my reactivation series: I send out one e-mail asking if they still want to be subscribed, and briefly describing why I keep my e-mail list tidy. In one week, I send them another email (if they already clicked on the confirmation link in the previous email, they have actually already been removed from the automation using a different automation) – Fatal Error: Cannot Redeclare Session_reset() Active Campaign.

Fatal Error: Cannot Redeclare Session_reset() Active Campaign

The automation then unsubscribes them. My e-mails also have a link to a kind where they can enter their email address to let me know that they don’t have tracking made it possible for. This kind adds a tag that I use to filter those contacts out. Fatal Error: Cannot Redeclare Session_reset() Active Campaign. I utilized to add this tag when they clicked a link, but when individuals do not have tracking on, it makes those links not work so dependably! I only send out a basic “do you still want my e-mails?” verification.